Jul 13 07:37:06.844: %PMAN-5-EXITACTION: R0/0: pvp: Process manager is exitinprocess exit with reload chassis code



Initializing Hardware......
     PID = C 9 4 0 0 X - S U P - 2 X L             
PID = 43 39 34 30 30 58 2D 53 55 50 2D 32 58 4C 20 20 20 20 20 20 

PSN = J A E 2 5 1 1 0 B S C 
4A 41 45 32 35 31 31 30 42 53 43 

Hw Rev = 0.3 

Controller Type = C AA 

Buffer Data 
43 39 34 30 30 58 2D 53 55 50 2D 32 58 4C 20 20 20 20 20 20 C AA 0 3 4A 41 45 32 35 31 31 30 42 53 43 0 0 0 0 0 
readBack = 4339343030582D53 from offset: 59D8
readBack = 55502D32584C2020 from offset: 59E0
readBack = 202020200CAA0003 from offset: 59E8
readBack = 4A41453235313130 from offset: 59F0
readBack = 4253430000000000 from offset: 59F8

System Bootstrap, Version 17.7.0.23, DEVELOPMENT SOFTWARE
Copyright (c) 1994-2021 by cisco Systems, Inc.
Compiled Mon Jun 28 09:42:57 2021 by dancao


Current ROMMON image : Primary
Last reset cause     : SoftwareResetTrig
C9400X-SUP-2XL platform with 16777216 Kbytes of main memory

Preparing to autoboot. [Press Ctrl-C to interrupt]  5     5     /-\|/-\|/-4     \|/-\|/-\|3     /-\|/-\|/-2     \|/-\|/-\|1     /-\|/-\|/-0     
boot: attempting to boot from [bootflash:packages.conf]
boot: reading file packages.conf
#
###################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################



Loading image in Verbose mode: 0



Retrieving ciscodb secure key certs failed, Status=0xE2

Retrieving manufacturing keys failed, Status=0x20


              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           Cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_IOSXE), Experimental Version 17.7.20210709:154156 [S2C-build-polaris_dev-141820-/nobackup/mcpre/BLD-BLD_POLARIS_DEV_LATEST_20210709_153157 121]
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Fri 09-Jul-21 14:38 by mcpre


This software version supports only Smart Licensing as the software licensing mechanism.


PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,
AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE
"SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL
ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU
ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.

Your use of the Software is subject to the Cisco End User License Agreement
(EULA) and any relevant supplemental terms (SEULA) found at
http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.

You hereby acknowledge and agree that certain Software and/or features are
licensed for a particular term, that the license to such Software and/or
features is valid only for the applicable term and that such Software and/or
features may be shut down or otherwise terminated by Cisco after expiration
of the applicable license term (e.g., 90-day trial period). Cisco reserves
the right to terminate any such Software feature electronically or by any
other means available. While Cisco may provide alerts, it is your sole
responsibility to monitor your usage of any such term Software feature to
ensure that your systems and networks are prepared for a shutdown of the
Software feature.


% Failed to initialize nvram
% Failed to initialize backup nvram

FIPS key on Standby is not configured.
If Active is  FIPS configured, please make sure to configure FIPS on Standby also.
Else switch is in non-standard operating mode.
cisco C9407R (X86) processor (revision V01) with 1843930K/6147K bytes of memory.
Processor board ID FXS2144Q2G7
32768K bytes of non-volatile configuration memory.
15932592K bytes of physical memory.
11161600K bytes of Bootflash at bootflash:.
1638400K bytes of Crash Files at crashinfo:.

Base Ethernet MAC Address          : 38:0e:4d:9a:e6:80
Motherboard Assembly Number        : 4B77
Motherboard Serial Number          : FXS213701D7
Model Revision Number              : V02
Motherboard Revision Number        : 3
Model Number                       : C9407R              
System Serial Number               : FXS2144Q2G7



Press RETURN to get started!


*Jul 13 07:40:47.644: %CRYPTO-5-SELF_TEST_START: Crypto algorithms release (Rel5a)
       begin self-test
*Jul 13 07:40:47.999: %CRYPTO-5-SELF_TEST_END: Crypto algoritms self-test completed successfully
       All tests passed.
*Jul 13 07:40:49.355: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed
*Jul 13 07:40:50.348: %IOSXE_RP_NV-3-BACKUP_NV_ACCESS_FAIL: Initial read of backup NVRAM contents failed
*Jul 13 07:40:51.254: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled 
*Jul 13 07:40:51.277: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Jul 13 07:40:51.303: %REDUNDANCY-3-PEER_MONITOR: PEER_FOUND event on standby
*Jul 13 07:41:07.624: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Jul 13 07:41:18.916: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowedRA Tracing tool registry return: 0
*Jul 13 07:41:21.523: ISIS-GRACEFUL-RELOAD: (Standby) Init State GR_NOT_SUPPORTED
*Jul 13 07:41:23.404: %TLSCLIENT-5-TLSCLIENT_IOS: TLS Client is IOS based
*Jul 13 07:41:23.703: %CRYPTO-4-AUDITWARN: Encryption audit check could not be performed
*Jul 13 07:41:23.703: %CRYPTO_ENGINE-4-CSDL_COMPLIANCE_DISABLED: Cisco PSB security compliance has been disabled
*Jul 13 07:41:23.711: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Jul 13 07:41:24.122: %SYS-3-HARIKARI: Process pki_app top-level routine exited
*Jul 13 07:41:24.258: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jul 13 07:41:24.258: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jul 13 07:41:24.258: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jul 13 07:41:24.258: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jul 13 07:41:24.271: %ILPOWER-6-SET_ILPOWER: Set power allocated to POE to 890 for slot 0
*Jul 13 07:41:25.262: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default
*Jul 13 07:42:37.839: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Jul 13 07:44:46.177: %SYS-7-NVRAM_INIT_WAIT_TIME: Waited 0 seconds for NVRAM to be available
*Jul 13 07:44:46.393: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-3431913778 has been generated or imported by crypto config
*Jul 13 07:44:48.946: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: SLA-TrustPoint created succesfully
*Jul 13 07:44:49.277: %CRYPTO_ENGINE-5-KEY_REPLACE: A key named TP-self-signed-3431913778 has been replaced by crypto config with new key data 
*Jul 13 07:44:49.284: %SSH-5-DISABLED: SSH 1.99 has been disabled
*Jul 13 07:45:09.559: %CRYPTO-5-SELF_TEST_START: Crypto algorithms release (Rel5a)
       begin self-test
*Jul 13 07:45:09.572: %CRYPTO-5-SELF_TEST_END: Crypto algoritms self-test completed successfully
       All tests passed.
*Jul 13 07:45:09.959: %LINEPROTO-5-UPDOWN: Line protocol on Interface Bluetooth0/4, changed state to down
*Jul 13 07:45:10.010: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Jul 13 07:45:10.075: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_IOSXE), Experimental Version 17.7.20210709:154156 [S2C-build-polaris_dev-141820-/nobackup/mcpre/BLD-BLD_POLARIS_DEV_LATEST_20210709_153157 121]
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Fri 09-Jul-21 14:38 by mcpre
*Jul 13 07:45:10.075: %PLATFORM_SYS-6-UPTIME: Time taken to initialize system =  364 seconds
*Jul 13 07:45:11.126: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-3431913778.server has been generated or imported by crypto-engine
*Jul 13 07:45:11.167: %SYS-6-BOOTTIME: Time taken to reboot after reload =  505 seconds

