Metadata-Version: 1.1
Name: django-allauth
Version: 0.11.1
Summary: Integrated set of Django applications addressing authentication, registration, account management as well as 3rd party (social) account authentication.
Home-page: http://github.com/pennersr/django-allauth
Author: Raymond Penners
Author-email: raymond.penners@intenct.nl
License: UNKNOWN
Description: ==========================
        Welcome to django-allauth!
        ==========================
        
        .. image:: https://travis-ci.org/pennersr/django-allauth.png
           :target: http://travis-ci.org/pennersr/django-allauth
        
        Integrated set of Django applications addressing authentication,
        registration, account management as well as 3rd party (social) account
        authentication.
        
        Rationale
        =========
        
        Most existing Django apps that address the problem of social
        authentication focus on just that. You typically need to integrate
        another app in order to support authentication via a local
        account. 
        
        This approach separates the worlds of local and social
        authentication. However, there are common scenarios to be dealt with
        in both worlds. For example, an e-mail address passed along by an
        OpenID provider is not guaranteed to be verified. So, before hooking
        an OpenID account up to a local account the e-mail address must be
        verified. So, e-mail verification needs to be present in both worlds.
        
        Integrating both worlds is quite a tedious process. It is definately
        not a matter of simply adding one social authentication app, and one
        local account registration app to your `INSTALLED_APPS` list.
        
        This is the reason this project got started -- to offer a fully
        integrated authentication app that allows for both local and social
        authentication, with flows that just work.
        
        
        Overview
        ========
        
        Requirements
        ------------
        
        - Python 2.6, 2.7 or 3.3
        
        - Django (1.4.3+)
        
        - python-openid or python3-openid (depending on your Python version)
        
        - requests and requests-oauthlib
        
        Supported Flows
        ---------------
        
        - Signup of both local and social accounts
        
        - Connecting more than one social account to a local account
        
        - Disconnecting a social account -- requires setting a password if
          only the local account remains
        
        - Optional instant-signup for social accounts -- no questions asked
        
        - E-mail address management (multiple e-mail addresses, setting a primary)
        
        - Password forgotten flow
        
        - E-mail address verification flow
        
        Supported Providers
        -------------------
        
        - Bitly (OAuth2)
        
        - Dropbox (OAuth)
        
        - Facebook (both OAuth2 and JS SDK)
        
        - Github
        
        - Google (OAuth2)
        
        - LinkedIn
        
        - OpenId
        
        - Persona
        
        - SoundCloud (OAuth2)
        
        - Stack Exchange (OAuth2)
        
        - Twitch (OAuth2)
        
        - Twitter
        
        - Vimeo (OAuth)
        
        - Weibo (OAuth2)
        
        Note: OAuth/OAuth2 support is built using a common code base, making it easy to add support for additional OAuth/OAuth2 providers. More will follow soon...
        
         
        Features
        --------
        
        - Supports multiple authentication schemes (e.g. login by user name,
          or by e-mail), as well as multiple strategies for account
          verification (ranging from none to e-mail verification).
        
        - All access tokens are consistently stored so that you can publish
          wall updates etc.
        
        Architecture & Design
        ---------------------
        
        - Pluggable signup form for asking additional questions during signup.
        
        - Support for connecting multiple social accounts to a Django user account.
        
        - The required consumer keys and secrets for interacting with
          Facebook, Twitter and the likes are to be configured in the database
          via the Django admin using the SocialApp model.
        
        - Consumer keys, tokens make use of the Django sites framework. This
          is especially helpful for larger multi-domain projects, but also
          allows for for easy switching between a development (localhost) and
          production setup without messing with your settings and database.
        
        
        Installation
        ============
        
        Django
        ------
        
        settings.py::
        
            TEMPLATE_CONTEXT_PROCESSORS = (
                ...
                "django.core.context_processors.request",
                ...
                "allauth.account.context_processors.account",
                "allauth.socialaccount.context_processors.socialaccount",
                ...
            )
        
            AUTHENTICATION_BACKENDS = (
                ...
                # Needed to login by username in Django admin, regardless of `allauth`
                "django.contrib.auth.backends.ModelBackend",
        
                # `allauth` specific authentication methods, such as login by e-mail
                "allauth.account.auth_backends.AuthenticationBackend",
                ...
            )
        
            INSTALLED_APPS = (
                ...
                'allauth',
                'allauth.account',
                'allauth.socialaccount',
        	# ... include the providers you want to enable:
                'allauth.socialaccount.providers.bitly',
                'allauth.socialaccount.providers.dropbox',
                'allauth.socialaccount.providers.facebook',
                'allauth.socialaccount.providers.github',
                'allauth.socialaccount.providers.google',
                'allauth.socialaccount.providers.linkedin',
                'allauth.socialaccount.providers.openid',
                'allauth.socialaccount.providers.persona',
                'allauth.socialaccount.providers.soundcloud',
                'allauth.socialaccount.providers.stackexchange',
                'allauth.socialaccount.providers.twitch',
                'allauth.socialaccount.providers.twitter',
                'allauth.socialaccount.providers.vimeo',
                'allauth.socialaccount.providers.weibo',
                ...
            )
        
        urls.py::
        
            urlpatterns = patterns('',
                ...
                (r'^accounts/', include('allauth.urls')),
                ...
            )
        
        
        Configuration
        -------------
        
        Available settings:
        
        ACCOUNT_ADAPTER (="allauth.account.adapter.DefaultAccountAdapter")
          Specifies the adapter class to use, allowing you to alter certain
          default behaviour.
        
        ACCOUNT_AUTHENTICATION_METHOD (="username" | "email" | "username_email")
          Specifies the login method to use -- whether the user logs in by
          entering his username, e-mail address, or either one of both.
        
        ACCOUNT_EMAIL_CONFIRMATION_ANONYMOUS_REDIRECT_URL (=settings.LOGIN_URL)
          The URL to redirect to after a successful e-mail confirmation, in case no
          user is logged in.
        
        ACCOUNT_EMAIL_CONFIRMATION_AUTHENTICATED_REDIRECT_URL (=None)
          The URL to redirect to after a successful e-mail confirmation, in
          case of an authenticated user. Set to `None` to use
          `settings.LOGIN_REDIRECT_URL`.
        
        ACCOUNT_EMAIL_CONFIRMATION_EXPIRE_DAYS (=3)
          Determines the expiration date of email confirmation mails (# of days).
        
        ACCOUNT_EMAIL_REQUIRED (=False)
          The user is required to hand over an e-mail address when signing up.
        
        ACCOUNT_EMAIL_VERIFICATION (="mandatory" | "optional" | "none")
          Determines the e-mail verification method during signup. When set to
          "mandatory" the user is blocked from logging in until the email
          address is verified. Choose "optional" or "none" to allow logins
          with an unverified e-mail address. In case of "optional", the e-mail
          verification mail is still sent, whereas in case of "none" no e-mail
          verification mails are sent.
        
        ACCOUNT_EMAIL_SUBJECT_PREFIX (="[Site] ")
          Subject-line prefix to use for email messages sent. By default, the
          name of the current `Site` (`django.contrib.sites`) is used.
        
        ACCOUNT_LOGOUT_ON_GET (=False)
          Determines whether or not the user is automatically logged out by a
          mere GET request. See documentation for the `LogoutView` for
          details.
        
        ACCOUNT_LOGOUT_REDIRECT_URL (="/")
          The URL (or URL name) to return to after the user logs out. This is 
          the counterpart to Django's `LOGIN_REDIRECT_URL`.
        
        ACCOUNT_SIGNUP_FORM_CLASS (=None)
          A string pointing to a custom form class
          (e.g. 'myapp.forms.SignupForm') that is used during signup to ask
          the user for additional input (e.g. newsletter signup, birth
          date). This class should implement a 'save' method, accepting the
          newly signed up user as its only parameter.
        
        ACCOUNT_SIGNUP_PASSWORD_VERIFICATION (=True)
          When signing up, let the user type in his password twice to avoid typ-o's.
        
        ACCOUNT_UNIQUE_EMAIL (=True)
          Enforce uniqueness of e-mail addresses.
        
        ACCOUNT_USER_MODEL_USERNAME_FIELD (="username")
          The name of the field containing the `username`, if any. See custom
          user models.
        
        ACCOUNT_USER_MODEL_EMAIL_FIELD (="email")
          The name of the field containing the `email`, if any. See custom
          user models.
          
        ACCOUNT_USER_DISPLAY (=a callable returning `user.username`)
          A callable (or string of the form `'some.module.callable_name'`)
          that takes a user as its only argument and returns the display name
          of the user. The default implementation returns `user.username`.
        
        ACCOUNT_USERNAME_MIN_LENGTH (=1)
          An integer specifying the minimum allowed length of a username.
        
        ACCOUNT_USERNAME_BLACKLIST (=[])
          A list of usernames that can't be used by user.
        
        ACCOUNT_USERNAME_REQUIRED (=True)
          The user is required to enter a username when signing up. Note that
          the user will be asked to do so even if
          `ACCOUNT_AUTHENTICATION_METHOD` is set to `email`. Set to `False`
          when you do not wish to prompt the user to enter a username.
        
        ACCOUNT_PASSWORD_INPUT_RENDER_VALUE (=False)
          `render_value` parameter as passed to `PasswordInput` fields.
        
        ACCOUNT_PASSWORD_MIN_LENGTH (=6)
          An integer specifying the minimum password length.
        
        SOCIALACCOUNT_ADAPTER (="allauth.socialaccount.adapter.DefaultSocialAccountAdapter")
          Specifies the adapter class to use, allowing you to alter certain
          default behaviour.
        
        SOCIALACCOUNT_QUERY_EMAIL (=ACCOUNT_EMAIL_REQUIRED)
          Request e-mail address from 3rd party account provider? E.g. using
          OpenID AX, or the Facebook "email" permission.
        
        SOCIALACCOUNT_AUTO_SIGNUP (=True) 
          Attempt to bypass the signup form by using fields (e.g. username,
          email) retrieved from the social account provider. If a conflict
          arises due to a duplicate e-mail address the signup form will still
          kick in.
        
        SOCIALACCOUNT_AVATAR_SUPPORT (= 'avatar' in settings.INSTALLED_APPS)
          Enable support for django-avatar. When enabled, the profile image of
          the user is copied locally into django-avatar at signup.
        
        SOCIALACCOUNT_EMAIL_REQUIRED (=ACCOUNT_EMAIL_REQUIRED)
          The user is required to hand over an e-mail address when signing up
          using a social account.
        
        SOCIALACCOUNT_EMAIL_VERIFICATION (=ACCOUNT_EMAIL_VERIFICATION)
          As `ACCOUNT_EMAIL_VERIFICATION`, but for social accounts.
        
        SOCIALACCOUNT_PROVIDERS (= dict)
          Dictionary containing provider specific settings.
        
        
        Upgrading
        ---------
        
        From 0.9.0
        **********
        
        - Logout no longer happens on GET request. Refer to the `LogoutView`
          documentation for more background information. Logging out on GET
          can be restored by the setting `ACCOUNT_LOGOUT_ON_GET`. Furthermore,
          after logging out you are now redirected to
          `ACCOUNT_LOGOUT_REDIRECT_URL` instead of rendering the
          `account/logout.html` template.
        
        - `LOGIN_REDIRECT_URLNAME` is now deprecated. Django 1.5 accepts both
          URL names and URLs for `LOGIN_REDIRECT_URL`, so we do so as well.
        
        - `DefaultAccountAdapter.stash_email_verified` is now named
          `stash_verified_email`.
        
        - Django 1.4.3 is now the minimal requirement.
        
        - Dropped dependency on (unmaintained?) oauth2 package, in favor of
          requests-oauthlib. So you will need to update your (virtual)
          environment accordingly.
        
        - We noticed a very rare bug that affects end users who add Google
          social login to existing accounts. The symptom is you end up with
          users who have multiple primary email addresses which conflicts
          with assumptions made by the code. In addition to fixing the code
          that allowed duplicates to occur, there is a managegement command
          you can run if you think this effects you (and if it doesn't effect
          you there is no harm in running it anyways if you are unsure):
        
          - `python manage.py account_unsetmultipleprimaryemails`
            
            - Will silently remove primary flags for email addresses that
              aren't the same as `user.email`.
        
            - If no primary `EmailAddress` is `user.email` it will pick one
              at random and print a warning.
        
        - The expiry time, if any, is now stored in a new column
          `SocialToken.expires_at`. Migrations are in place.
        
        - Furthermore, Facebook started returning longer tokens, so the
          maximum token length was increased. Again, migrations are in place.
        
        - Login and signup views have been turned into class-based views.
        
        - The template variable `facebook_perms` is no longer passed to the
          "facebook/fbconnect.html" template. Instead, `fb_login_options`
          containing all options is passed.
        
        From 0.8.3
        **********
        
        - `requests` is now a dependency (dropped `httplib2`).
        
        - Added a new column `SocialApp.client_id`. The value of `key` needs
          to be moved to the new `client_id` column. The `key` column is
          required for Stack Exchange. Migrations are in place to handle all
          of this automatically.
        
        From 0.8.2
        **********
        
        - The `ACCOUNT_EMAIL_VERIFICATION` setting is no longer a boolean
          based setting. Use a string value of "none", "optional" or
          "mandatory" instead.
        
        - The template "account/password_reset_key_message.txt" has been moved
          to "account/email/password_reset_key_message.txt". The subject of
          the message has been moved into a template
          ("account/email/password_reset_key_subject.txt").
        
        - The `site` foreign key from `SocialApp` to `Site` has been replaced
          by a `ManyToManyField`. Many apps can be used across multiple
          domains (Facebook cannot).
        
        
        From 0.8.1
        **********
        
        - Dropped support for `CONTACT_EMAIL` from the `account` template
          context processor. It was never documented and only used in the
          templates as an example -- there is no need to pollute the `allauth`
          settings with that. If your templates rely on it then you will have
          to put it in a context processor yourself.
        
        From 0.7.0
        **********
        
        - `allauth` now depends on Django 1.4 or higher.
        
        - Major impact: dropped dependency on the `emailconfirmation` app, as
          this project is clearly left unmaintained. Important tickets such
          as https://github.com/pinax/django-email-confirmation/pull/5 are not
          being addressed. All models and related functionality have been
          directly integrated into the `allauth.account` app. When upgrading
          take care of the following:
        
          - The `emailconfirmation` setting `EMAIL_CONFIRMATION_DAYS` has been
            replaced by `ACCOUNT_EMAIL_CONFIRMATION_EXPIRE_DAYS`.
        
          - Instead of directly confirming the e-mail address upon the GET
            request the confirmation is now processed as part of an explicit
            POST. Therefore, a new template `account/email_confirm.html` must
            be setup.
        
          - Existing `emailconfirmation` data should be migrated to the new
            tables. For this purpose a special management command is
            available: `python manage.py
            account_emailconfirmationmigration`. This command does not drop
            the old `emailconfirmation` tables -- you will have to do this
            manually yourself. Why not use South? EmailAddress uniqueness
            depends on the configuration (`ACCOUNT_UNIQUE_EMAIL`), South does
            not handle settings dependent database models.
        
        - `{% load account_tags %}` is deprecated, simply use: `{% load account %}`
        
        - `{% load socialaccount_tags %}` is deprecated, simply use: 
          `{% load socialaccount %}`
        
        From 0.5.0
        **********
        
        - The `ACCOUNT_EMAIL_AUTHENTICATION` setting has been dropped in favor
          of `ACCOUNT_AUTHENTICATION_METHOD`.
        
        - The login form field is now always named `login`. This used to by
          either `username` or `email`, depending on the authentication
          method. If needed, update your templates accordingly.
        
        - The `allauth` template tags (containing template tags for
          OpenID, Twitter and Facebook) have been removed. Use the
          `socialaccount` template tags instead (specifically: `{% provider_login_url
          ... %}`).
        
        - The `allauth.context_processors.allauth` context processor has been
          removed, in favor of
          `allauth.socialaccount.context_processors.socialaccount`. In doing
          so, all hardcodedness with respect to providers (e.g
          `allauth.facebook_enabled`) has been removed.
        
        
        From 0.4.0
        **********
        
        - Upgrade your `settings.INSTALLED_APPS`: Replace `allauth.<provider>`
          (where provider is one of `twitter`, `facebook` or `openid`) with
          `allauth.socialaccount.providers.<provider>`
        
        - All provider related models (`FacebookAccount`, `FacebookApp`,
          `TwitterAccount`, `TwitterApp`, `OpenIDAccount`) have been unified
          into generic `SocialApp` and `SocialAccount` models. South migrations
          are in place to move the data over to the new models, after which
          the original tables are dropped. Therefore, be sure to run migrate
          using South.
        
        Providers
        =========
        
        Most providers require you to sign up for a so called API client or
        app, containing a client ID and API secret. You must add a `SocialApp`
        record per provider via the Django admin containing these app
        credentials.
        
        When creating the OAuth app on the side of the provider pay special
        attention to the callback URL (sometimes also referred to as redirect
        URL). If you do not configure this correctly, you will receive login
        failures when attempting to log in, such as::
        
            An error occured while attempting to login via your social network account.
        
        Use a callback URL of the form::
        
            http://example.com/accounts/twitter/login/callback/
            http://example.com/accounts/soundcloud/login/callback/
            ...
        
        For local development, use the following::
        
            http://127.0.0.1:8000/accounts/twitter/login/callback/
        
        
        Facebook
        --------
        
        For Facebook both OAuth2 and the Facebook Connect Javascript SDK are
        supported. You can even mix the two.
        
        Advantage of the Javascript SDK may be a more streamlined user
        experience as you do not leave your site. Furthermore, you do not need
        to worry about tailoring the login dialog depending on whether or not
        you are using a mobile device. Yet, relying on Javascript may not be
        everybody's cup of tea.
        
        To initiate a login use::
        
            {% load socialaccount %}
            <a href="{% provider_login_url "facebook" method="js_sdk" %}">Facebook Connect</a>
        
        or::
        
            {% load socialaccount %}
            <a href="{% provider_login_url "facebook" method="oauth2" %}">Facebook OAuth2</a>
        
        The following Facebook settings are available::
        
            SOCIALACCOUNT_PROVIDERS = \
                { 'facebook': 
                    { 'SCOPE': ['email', 'publish_stream'],
        	      'AUTH_PARAMS': { 'auth_type': 'reauthenticate' },
                      'METHOD': 'oauth2' ,
                      'LOCALE_FUNC': 'path.to.callable'} }
        
        METHOD
            Either `js_sdk` or `oauth2`
        
        SCOPE
            By default, `email` scope is required depending whether or not
            `SOCIALACCOUNT_QUERY_EMAIL` is enabled.
        
        AUTH_PARAMS
            Use `AUTH_PARAMS` to pass along other parameters to the `FB.login`
            JS SDK call.
        
        LOCALE_FUNC:
            The locale for the JS SDK is chosen based on the current active language of
            the request, taking a best guess. This can be customized using the
            `LOCALE_FUNC` setting, which takes either a callable or a path to a callable.
            This callable must take exactly one argument, the request, and return `a
            valid Facebook locale <http://developers.facebook.com/docs/
            internationalization/>`_ as a string::
        
                SOCIALACCOUNT_PROVIDERS = \
                    { 'facebook':
                        { 'LOCALE_FUNC': lambda request: 'zh_CN'} }
        
        App registration
            https://developers.facebook.com/apps
        
        Devlopment callback URL
            http://localhost:8000
        
        
        Google
        ------
        
        The Google provider is OAuth2 based. Register your Google API client
        over at `https://code.google.com/apis/console/`. Make sure you list a
        redirect uri of the form
        `http://example.com/accounts/google/login/callback/`.
        
        You can specify the scope to use as follows::
        
            SOCIALACCOUNT_PROVIDERS = \
                { 'google': 
                    { 'SCOPE': ['https://www.googleapis.com/auth/userinfo.profile'],
                      'AUTH_PARAMS': { 'access_type': 'online' } }}
        
        By default, `profile` scope is required, and optionally `email` scope
        depending on whether or not `SOCIALACCOUNT_QUERY_EMAIL` is enabled.
        
        
        LinkedIn
        --------
        
        The LinkedIn provider is OAuth based. Register your LinkedIn app over
        at `https://www.linkedin.com/secure/developer?newapp=`. Leave the
        OAuth redirect URL empty.
        
        You can specify the scope to use as follows::
        
            SOCIALACCOUNT_PROVIDERS = \
                { 'linkedin': 
                    { 'SCOPE': ['r_emailaddress'] } }
        
        By default, `r_emailaddress` scope is required depending on whether or
        not `SOCIALACCOUNT_QUERY_EMAIL` is enabled.
        
        Note: if you are experiencing issues where it seems as if the scope
        has no effect you may be using an old LinkedIn app that is not
        scope enabled. Please refer to
        `https://developer.linkedin.com/forum/when-will-old-apps-have-scope-parameter-enabled`
        for more background information.
        
        
        OpenID
        ------
        
        The OpenID provider does not require any settings per se. However, a
        typical OpenID login page presents the user with a predefined list of
        OpenID providers and allows the user to input his own OpenID identity
        URL in case his provider is not listed by default. The list of
        providers displayed by the builtin templates can be configured as
        follows::
        
            SOCIALACCOUNT_PROVIDERS = \
                { 'openid': 
                    { 'SERVERS': 
                        [dict(id='yahoo',
                              name='Yahoo',
                              openid_url='http://me.yahoo.com'),
                         dict(id='hyves',
                              name='Hyves',
                              openid_url='http://hyves.nl'),
                         dict(id='google',
                              name='Google',
                              openid_url='https://www.google.com/accounts/o8/id')]}}
        
        
        If you want to manually include login links yourself, you can use the
        following template tag::
        
            {% load socialaccount %}
            <a href="{% provider_login_url "openid" openid="https://www.google.com/accounts/o8/id" next="/success/url/" %}">Google</a>
        
        
        Persona
        -------
        
        Mozilla Persona does not require any settings. The
        `REQUEST_PARAMETERS` dictionary contains optional parameters that are
        passed as is to the `navigator.id.request()` method to influence the
        look and feel of the Persona dialog::
        
            SOCIALACCOUNT_PROVIDERS = \
                { 'persona': 
                    { 'REQUEST_PARAMETERS': {'siteName': 'Example' } } }
        
        
        SoundCloud
        ----------
        
        SoundCloud allows you to choose between OAuth1 and OAuth2.  Choose the
        latter. 
        
        
        Stack Exchange
        --------------
        
        Register your OAuth2 app over at
        `http://stackapps.com/apps/oauth/register`.  Do not enable "Client
        Side Flow". For local development you can simply use "localhost" for
        the OAuth domain.
        
        As for all providers, provider specific data is stored in
        `SocialAccount.extra_data`. For Stack Exchange we need to choose what
        data to store there by choosing the Stack Exchange site (e.g. Stack
        Overflow, or Server Fault). This can be controlled by means of the
        `SITE` setting::
        
            SOCIALACCOUNT_PROVIDERS = \
                { 'stackexchange': 
                    { 'SITE': 'stackoverflow' } }
        
        
        Twitch
        ------
        Register your OAuth2 app over at
        `http://www.twitch.tv/kraken/oauth2/clients/new`. 
        
        Vimeo
        -----
        
        App registration
            https://developer.vimeo.com/apps
        
        Devlopment callback URL
            http://localhost:8000
        
        
        Weibo
        -----
        
        Register your OAuth2 app over at
        `http://open.weibo.com/apps`. Unfortunately, Weibo does not allow for
        specifying a port number in the authorization callback URL. So for
        development purposes you have to use a callback url of the form
        `http://127.0.0.1/accounts/weibo/login/callback/` and run `runserver
        127.0.0.1:80`.
        
        
        
        Signals
        =======
        
        The following signals are emitted:
        
        - `allauth.account.signals.user_logged_in`
        
          Sent when a user logs in.
        
        - `allauth.account.signals.user_signed_up`
        
          Sent when a user signs up for an account. This signal is
          typically followed by a `user_logged_in`, unless e-mail verification
          prohibits the user to log in.
        
        - `allauth.socialaccount.signals.pre_social_login`
        
          Sent after a user successfully authenticates via a social provider,
          but before the login is fully processed. This signal is emitted as
          part of the social login and/or signup process, as well as when
          connecting additional social accounts to an existing account. Access
          tokens and profile information, if applicable for the provider, is
          provided.
        
        - `allauth.socialaccount.signals.social_account_added`
        
          Sent after a user connects a social account to a his local account.
        
        - `allauth.socialaccount.signals.social_account_removed`
        
          Sent after a user disconnects a social account from his local
          account.
        
        
        Views
        =====
        
        Logout
        ------
        
        The logout view (`allauth.account.views.LogoutView`) requests for
        confirmation before logging out. The user is logged out only when the
        confirmation is received by means of a POST request.
        
        If you are wondering why, consider what happens when a malicious user
        embeds the following image in a post::
        
            <img src="http://example.com/accounts/logout/">
        
        For this and more background information on the subject, see:
        
        - https://code.djangoproject.com/ticket/15619
        - http://stackoverflow.com/questions/3521290/logout-get-or-post
        
        If you insist on having logout on GET, then please consider adding a
        bit of Javascript to automatically turn a click on a logout link into
        a POST. As a last resort, you can set `ACCOUNT_LOGOUT_ON_GET` to
        `True`.
        
        Templates
        =========
        
        Template Tags
        -------------
        
        The following template tag libraries are available:
        
        - `account`: tags for dealing with accounts in general
        
        - `socialaccount`: tags focused on social accounts
        
        
        Account Tags
        ************
        
        Use `user_display` to render a user name without making assumptions on
        how the user is represented (e.g. render the username, or first
        name?)::
        
            {% load account %}
        
            {% user_display user %}
        
        Or, if you need to use in a `{% blocktrans %}`::
        
            {% load account %}
        
            {% user_display user as user_display %}
            {% blocktrans %}{{ user_display }} has logged in...{% endblocktrans %}
        
        Then, override the `ACCOUNT_USER_DISPLAY` setting with your project
        specific user display callable.
        
        
        Social Account Tags
        *******************
        
        Use the `provider_login_url` tag to generate provider specific login URLs::
        
            {% load socialaccount %}
        
            <a href="{% provider_login_url "openid" openid="https://www.google.com/accounts/o8/id" next="/success/url/" %}">Google</a>
            <a href="{% provider_login_url "twitter" %}">Twitter</a>
        
        
        For easy access to the social accounts for a user::
        
            {% get_social_accounts user as accounts %}
        
        Then::
        
            {{accounts.twitter}} -- a list of connected Twitter accounts
            {{accounts.twitter.0}} -- the first Twitter account
            {% if accounts %} -- if there is at least one social account
        
        Decorators
        ==========
        
        Verified E-mail Required
        ------------------------
        
        Even when email verification is not mandatory during signup, there
        may be circumstances during which you really want to prevent
        unverified users to proceed. For this purpose you can use the
        following decorator::
        
            from allauth.account.decorators import verified_email_required
        
            @verified_email_required
            def verified_users_only_view(request):
                ...
        
        The behavior is as follows:
        
        - If the user isn't logged in, it acts identical to the
          `login_required` decorator.
        
        - If the user is logged in but has no verified e-mail address, an
          e-mail verification mail is automatically resend and the user is
          presented with a page informing him he needs to verify his email
          address.
        
        
        Advanced Usage
        ==============
        
        Custom User Models
        ------------------
        
        If you use a custom user model you need to specify what field
        represents the `username`, if any. Here, `username` really refers to
        the field representing the nick name the user uses to login, and not
        some unique identifier (possibly including an e-mail adddress) as is
        the case for Django's `AbstractBaseUser.USERNAME_FIELD`.
        
        Meaning, if your custom user model does not have a `username` field
        (again, not to be mistaken with an e-mail address or user id), you
        will need to set `ACCOUNT_USER_MODEL_USERNAME_FIELD` to `None`. This
        will disable username related functionality in `allauth`.
        
        Similarly, you will need to set `ACCOUNT_USER_MODEL_EMAIL_FIELD` to
        `None`, or the proper field (if other than `email`).
        
        Invitations
        -----------
        
        Invitation handling is not supported, and most likely will not be any
        time soon. An invitation app could cover anything ranging from
        invitations of new users, to invitations of existing users to
        participate in restricted parts of the site. All in all, the scope of
        invitation handling is large enough to warrant being addressed in an
        app of its own.
        
        Still, everything is in place to easily hook up any third party
        invitation app. The account adapter
        (`allauth.account.adapter.DefaultAccountAdapter`) offers the following
        methods:
        
        - `is_open_for_signup(request)`. You can override this method to, for
          example, inspect the session to check if an invitation was accepted.
        
        - `stash_verified_email(request, email)`. If an invitation was
          accepted by following a link in a mail, then there is no need to
          send e-mail verification mails after the signup is completed. Use
          this method to record the fact that an e-mail address was verified.
        
        
        Sending E-mail
        --------------
        
        E-mails sent (e.g. in case of password forgotten, or e-mail
        confirmation) can be altered by providing your own
        templates. Templates are named as follows::
        
            account/email/email_confirmation_subject.txt
            account/email/email_confirmation_message.txt
        
        In case you want to include an HTML representation, add an HTML
        template as follows::
        
            account/email/email_confirmation_message.html
        
        If this does not suit your needs, you can hook up your own custom
        mechanism by overriding the `send_mail` method of the account adapter
        (`allauth.account.adapter.DefaultAccountAdapter`).
        
        
        Custom Redirects
        ----------------
        
        If redirecting to statically configurable URLs (as specified in your
        project settings) is not flexible enough, then you can override the
        following adapter methods:
        
        - `allauth.account.adapter.DefaultAccountAdapter`:
        
          - `get_login_redirect_url(request)`
        
          - `get_logout_redirect_url(request)`
        
          - `get_email_confirmation_redirect_url(request)`
        
        - `allauth.socialaccount.adapter.DefaultSocialAccountAdapter`:
        
          - `get_connect_redirect_url(request, socialaccount)`
        
        For example, redirecting to `/accounts/<username>/` can be implemented as
        follows::
        
            # project/settings.py:
            ACCOUNT_ADAPTER = 'project.users.adapter.MyAccountAdapter'
        
            # project/users/adapter.py:
            from django.conf import settings
            from allauth.account.adapter import DefaultAccountAdapter
            
            class MyAccountAdapter(DefaultAccountAdapter):
            
                def get_login_redirect_url(self, request):
                    path = "/accounts/{username}/"
                    return path.format(username=request.user.username)
        
        Messages
        --------
        
        All messages (as in `django.contrib.messages`) are configurable by
        overriding their respective template. If you want to disable a message
        simply override the message template with a blank one.
        
        
        Showcase
        ========
        
        - http://www.highlightcam.com/
        - http://officecheese.com
        - http://www.mycareerstack.com
        - http://jug.gl
        - http://www.charityblossom.org/
        - http://www.superreceptionist.in
        - http://www.edithuddle.com
        - http://kwatsi.com
        - http://www.smartgoalapp.com
        - http://www.neekanee.com/
        - http://healthifyme.com/
        - http://www.burufly.com
        - http://eatwith.com/
        - http://en.globalquiz.org/
        - ...
        
        Please mail me (raymond.penners@intenct.nl) links to sites that have
        `django-allauth` up and running.
        
Keywords: django auth account social openid twitter facebook oauth registration
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: Topic :: Software Development :: Libraries :: Python Modules
Classifier: Environment :: Web Environment
Classifier: Topic :: Internet
Classifier: Operating System :: OS Independent
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 2.6
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3.3
Classifier: Framework :: Django
